Non-Welded Piping Solutions in ASEAN | Chase Resource | Chase Resource

ASEAN & MIDDLE EAST REGION

Non-Welded Piping Solutions

Clean Technology. Safe World

Since 2006, Chase Resource has been driven by a simple belief: better engineering can build a better world.

What began as a specialist supplier of drilling equipment and consumables has evolved into a trusted provider of advanced non-welded piping solutions across ASEAN and the Middle East. Today, we bring together proven technology, engineering expertise and hands-on technical support to help industries move faster, work safer and build with greater confidence.

From petrochemical and offshore facilities to shipbuilding, automotive, metal and infrastructure projects, we work alongside our customers to solve demanding piping challenges — from design and engineering through installation, pressure testing and flushing.

Our journey has always been about more than products. It is about creating safer workplaces, cleaner processes and more efficient ways of building the infrastructure that powers tomorrow.

With two decades of experience, global reach and a commitment to continuous improvement, we remain focused on what comes next — advancing technology, strengthening partnerships and shaping a safer, more efficient industrial future.

End to End Capabilities

Design & Engineering

Fabrication

Component Supply

Installation

Pressure Testing

Flushing

Industries Served

Automotive Testing

ship being built

Shipbuilding

molten metal ladle pouring molten metal

Steel

Mining

Refinery

Offshore

Defence

Industrial

Non-Welded Piping Products

37° Flare Flange

A non-welded piping connection that uses a precision 37° flared tube end to create a secure, high-pressure seal.

For small bore high pressure systems
1/2" through 10" NPS
Available in Stainless Steel & Carbon Steel

Retain Ring Flange

A non-welded piping connection that mechanically secures the pipe using a retaining ring for reliable high-pressure service.

For large bore high pressure systems
1-1/2" through 12" NPS
In Stainless Steel & Carbon Steel

Pyplok®

A non-welded piping connection that uses cold forming to create a permanent, high-strength joint without welding or heat.

Permanent tamperproof fitting
(1/4″–4″NPS), (1/4″–2″OD), (6–115mm)
In SS, CS, Duplex, Super Duplex, Titanium, Cu-Ni

PreFiS®

Precision press-fit connection design to create fast, secure and reliable pipe joints.

Permanent Tamper Proof fitting
1/2" to 3" NPS
In Carbon Steel & Stainless Steel

Projects

The Samruddhi Mahamarg Tunnel project demonstrates the application of PreFiS® non-welded press-fit technology in a high-pressure water mist fire protection system, operating at pressures of up to 140 bar across approximately 8 km of tunnel infrastructure.

PreFiS® Tubing for Samruddhi Mahamarg Tunnel

Indian distributor Cenergy Offshore repaired HPCL’s critical 4-inch gas exhaust line using PYPLOK® cold-swaging technology, replacing a repeatedly failing welded joint with a leak-free mechanical connection. The repair reduced downtime, eliminated hot work and improved safety and joint reliability.

Gas Exhaust Vent System Remediation & Repair for HPCL Mahul Refinery

Cenergy Offshore, an Indian distributor, installed approximately 350 metres of prefabricated, non-welded hydraulic hardline for the granulator at NMDC’s Nagarnar Steel Plant. The 315-bar system comprised pressure, return, drain and flushing lines using Tube-Mac flange technology.

Hydraulic Hardline for NMDC Sinter Plant Granulator

Cenergy Offshore, an Indian distributor and Tube-Mac delivered a high-pressure 6-inch SCHXXS SS316L hydraulic pipe spool for L&T’s defence testing equipment. The Tube-Mac Retain Ring Flange System enabled flange assembly after passing the pipe through a restricted fixed bulkhead.

Hydraulic Pipe Spool for L&T Defence Testing Equipment

Cenergy Offshore, an Indian distributor designed and commissioned a non-welded hydraulic hardline system for Cummins’ Block and Head Test Rig Fatigue Laboratory. The 50-metre system served two high-pressure circuits up to 5,800 PSI and was engineered for the rig’s high-vibration operating environment.

Hydraulic Hardline for Cummins Block and Head Test Rig

Cenergy Offshore, an Indian distributor supplied approximately 2,000 PYPLOK® fittings, tools and technical support for Owens Corning’s 80,000-ton glass melter facility in Taloja, enabling faster piping installation while reducing dependence on skilled welders and conventional hot-work activities.

PYPLOK® Piping for Owens Corning Glass Melter Facility

Looking for a solution ?

Talk to our engineering team about your piping requirements and find the right solution for your application.