1. Power Unit.
A Hydraulically actuated Swaging Tool which radially swages the Pyplok® Fittings onto a tube/pipe.
There are presently 6 types i.e. Model 10, 20, 40, 55, 70, 86. The selection of these models depends on the size of the fitting that has to be installed. Please refer to the table to know the exact unit required.
Click here to view the Pyplok® tool selection table.
2. Head Assembly with Dies
Attaches to power unit and, when actuated, swages fittings onto pipe. This is unique for every size and size standard of Pyplok® fittings.
Tube-Mac® series 10,000 psi pumps are the power supply, available in manual, electric, pneumatic and rechargeable electric. The battery operated pump (shown in the picture) is only able to power Model 10 and Model 20 Power Units. To power the higher Models we need to use either the manual, pneumatic or electric pump.
10,000 psi Hydraulic Hose. 10 feet long. This is standard for the installation of any size of the fittings.
5. Marking/Inspection Gauge.
Used for marking insertion depth on pipe and for verifying the 'after-swage' dimensions. There are seperate gauges for each pipe/tube size.